Duality In Action…

A Preamble

I must confess that as far as religion is concerned, I’m something of an enigma!  I don’t profess to any religious leaning.  Like most people in the West, I was brought up in a Christian society, though not one that has taken its religion seriously since the  beginning of the 20th Century.  Still, as a child I was exposed to Christian imagery and teaching.  What’s more, I lived half way between two churches 🙂  That said, my father is, and has been since his service during the Second World War, an atheist and didn’t hide that fact.  So I think that was a fairly balanced upbringing with regard to religion.  Naturally, in common with many others, I’ve been through periods when I’ve sought for something that I could believe in with that blind faith that is such a mystery to most, and is at times envied by the majority for the comfort it seems to provide.  One thing is true: I have constantly maintained a respect for others’ beliefs!

So what am I babbling about really?  Well, I frequently find myself making crosses!  Yesterday was one of those occasions!

The Point of This Post

I wanted, inexplicably, to make a cross.  More, I wanted it to reflect the wire working I’ve been doing lately.  And furthermore, I wanted something that was genuinely different!  Well, I believe I achieved all of that, happily 🙂  I first made a cross out of 0.8mm (20 swg) silver plated copper wire, starting and finishing at the top, where the two cut ends could be made into a bail, which is a loop of the two strands twisted together, and then the longest tail used to create a wrap beneath the loop.  I then hammered all the wire except the bail, until the round wire was entirely flat, at which point I used the ball of the ball pein hammer to create a texture.  This whole process, I calculated, would make it easier to get the wire I’d use shortly to stay where I put it!

The next step involved first attaching silver 28 gauge craft wire from The Bead Smith (I don’t know whether this gauge is SWG or AWG!  If anybody out there does know, I’d love to hear from you :)) at the bottom of the cross, leaving about half an inch (12.7mm) tail, wound fou times round the bottom then four more times across the bottom.  I now started the beading.  First on the wire were two wooden beads.  I wrapped the wire fully round the cross, then, and made sure it fixed the beads in place.  Next came two faux pearls.  I didn’t make a full wrap after that though.  I proceeded to repeat these two beaded wrap steps until I got to the intersection with the arms of the cross.  I then took the wire to the far end of the left arm and repeated the process used in the vertical.  On reaching the intersection, I took the wire to the far end of the right arm and repeated what I’d done on the left arm.

When I returned to the intersection again, I now inserted a largish amethyst chip on the face with the wooden beads on it and a large faux pearl on the pearl beaded side, making sure that they were both seated firmly!  Finally, I beaded the top vertical section as the rest had been done.  All that remained to be done then was to hide the starting and finishing tails of the wrapping wire.  Happy with the cross pendant, I attached a small jump ring to the bail.  At first, I wasn’t sure what I was going to do about turning the pendant into a necklace 🙂  In the end, I opted for a fairly narrow cord, on the cut ends of  which I used small cord grips.  A couple more small jump rings and a ring clasp and I was done!

Cross (pendant)

The two faces of a beaded cross (pendant).

WHy did I choose to express this duality of the cross?  I’m not altogether sure how my mind works sometimes LOL!  Quite simply, the wood represents the wood of the crucifixion cross itself and the humility Christianity encourages in believers.  The pearls were a consequence of a vague feeling that they had some significance to Christianity!  My head is full of trivia, not all very clear and with no indication of where it all originates from 😀  However, in Christianity the pearl is a symbol of purity, tears, love and fertility and is believed to ward off evil.  The symbolism of purity, love and fertility (and possibly tears?) explains why pearls are associated with brides.  I’ll admit to the amethyst having been simply an addition that just seemed to fit with the wooden beads aesthetically!

I have tested this and, contrary to my fears, the cross sits perfectly even when the pearl side is against the body meaning that it rests on the single large pearl!

Another web site

Yesterday, I came upon another very good jewellery making site!  How-to-Make-Jewelry.com provides a considerable fund of information on jewellery making, including advice on selling your creations.  It is well worth exploring!

By Moonlight…

Very recently, our eldest (Damien) gave me some beads, including moonstone!  Now moonstone is one of my birthstones, so it was very appropriate.  It was essential that I make something special, with other gems.  After some thought, I decided to make an illusion necklace, combining aventurine and moonstone, on monofilament thread.  It would be my first effort!  I’m quite pleased with the outcome 🙂   Strangely, the moonstone round reacted powerfully to the flash,  producing a fiery glow!

Illusory Moon Necklace

Illusory Moon Necklace

The wire cone I made myself, using my round nose pliers.

In my stash was a strand of Picasso jasper puffy coins.  While using these, I noticed that some had such beautiful markings on their faces that it would be a shame to, effectively, hide them by stringing them normally.  As a result, I turned four of them into a pair of earrings:

Picasso Jasper Earrings

Picasso Jasper Earrings

Beads of Clay

I was recently persuaded to have a go with polymer clay by Jenny. I’ll admit that one thing I was lacking was confidence! Combine that with no more than scraps of knowledge and I was definitely not working from a position of strength. Regardless, I had a vague idea of something to make as a major item, plus some smaller items. Of the smaller items, one set will appear at a later date: filigree bead caps. The rest of the items were all used in this project! I used Sculpey clay, which is less prone to staining hnds or oher surfaces.

In addition, this project features, in its simplest form, another new activity: Gizmo wire coiling! The Gizmo is a simple tool that can be used to achieve some remarkable results. In essence, it makes coiling wire extremely easy, and it’s in this most basic way tht I used it for this project, using light wires.

Sculpey Garden Necklace

Sculpey Garden Necklace

Sculpey Garden Necklace Close-up

Sculpey Garden Necklace Close-up

 

The close-up shows the polymer clay elements more clearly. The pendant has peridot and amethyst chps embedded in it, which are supposed to suggest flowers. The hexagonal bead and the three yellow beads lead up to the gemstone beads of the neckace. It is rich in gemstones! Aventurine chips, smoky quartz nuggets, amethyst chips, Picasso jasper rondelles, snowflake obsidian rounds and garnet rounds all combine with brown, red and bright copper wire in creating the necklace.

Wrist or Ankle Decor

Why do I always describe things as bracelets if they’re small circlets?   It’s quite wrong of me, of course.  They could, after all, be either bracelets oranklets!  Anyway, whatever they may be, ultimately, here are two of them:

Carnelian Drop Bracelet

Carnelian Drop Bracelet

A gold-look chain with a single wire-wrapped carnelian and custom catch.

Circle of Delights Bracelet

Circle of Delights Bracelet

A charm circlet with garnets, two snowflake obsidian rounds, metal spacer beads and charms that represent (hopefully) things which delight some folk..

                                E     X     T     R    A                               

If you own an iPhone or iPod Touch, Ring Sizer is an app I’m delighted to recommend.  The very clear name of the app sets the standard.  Easy to use but remaining attractive.  You can obtain accurate measurements of existing rings or any finger/thum (no, I haven’t tried it on toes!).  Measurements can be set to whatever national system you prefer.  There’s also a comprehensive conversion chart.

“Rosary” Necklace

I’m not a religious person but I had a desire to make a beaded cross. I finally got around to trying it. The resultant necklace, Jenny thinks, looks rather like a rosary:

Rosary Necklace

I used smoky quartz, Picasso jasper, carnelian, amethyst, garnet, ornate metal spacers and man-made beads.

Seeking Sophistication plus Camouflaged

During an outbreak of energy I did some beading that I thought was worth showing you:

Putting on the Ritz

Putting on the Ritz

This set for Jenny consists of carnelian, snowflake obsidian and garnet with gold seed and bugle beads. As you may guess, I was attempting to achieve a sophisticated look. Hopefully I succeeded…(?)

Camouflage Bracelet

Camouflage Bracelet

This bracelet I made for myself. It consists of Picasso jasper and green aventurine, with two carnelians as feature beads.

For the Love of Jenny…

There is no doubt in my mind.  My jewellery making efforts originate in my fascination with gemstones and, more powerfully, my love of Jenny.  In the case of the former, it represents the fact that I would  love to become a gemologist, an ambition which is sadly unrealistic.  The latter case is something I can and will continue to demonstrate.  So, these new items are most definitely in pursuit of the second, and primary, motivation!   Oh, and you’re likely to find that amethysts feature frequently, because amethyst is Jenny’s birthstone.

First up on the ‘gemwalk’  is an earring set, which I rather lamely called the Triplets Set.  Inspired by nothing more than possession of the rather beautiful findings from the Precious Accents range by Cousin Corporation of America (indubitably my favourite accessories supplier!).  The gemstones are carnelian, smoky quartz, garnet and amethyst.

Triplets Earring Set

Triplets Earring Set

The following is the Amethyst Falls Set.  Based on a desire to make an attractive but minimalist piece, it obviously required something other than my usual stringing material.  The necklace is based on oval chain.  The drops are populated with smoky quartz nuggets, as a weight, and amethyst chips.  The two flanking drops terminate in eyes, to permit some degree of adaptation, so that the necklace may have different looks.  The earrings reflect the centre drop of the necklace, and features the same gemstones.

Amethyst Falls Set

Amethyst Falls Set

I’m happy to say that Jenny loved them!

Previous Older Entries

%d bloggers like this: